Editing My 3GPP 33.501 notes

== Definitions ==
=== 5G security context===
The state that is established locally at the UE and a serving network domain and represented by the "5G security context data" stored at the UE and a serving network.

NOTE 1:	The "5G security context data" consists of the 5G NAS security context, and the 5G AS security context for 3GPP access and/or the 5G AS security context for non-3GPP access.

NOTE 2:	A 5G security context has type "mapped", "full native" or "partial native". Its state can either be "current" or "non-current". A context can be of one type only and be in one state at a time. The state of a particular context type can change over time. A partial native context can be transformed into a full native. No other type transformations are possible. 

=== 5G AS security context for 3GPP access ===
The cryptographic keys at AS level with their identifiers, the Next Hop parameter (NH), the Next Hop Chaining Counter parameter (NCC) used for next hop access key derivation, the identifiers of the selected AS level cryptographic algorithms, the UE security capabilities, and the UP Security Policy at the network side, UP security activation status and the counters used for replay protection. 

NOTE 3:	NH and NCC need to be stored also at the AMF during connected mode.

NOTE 4:	UP security activation status is sent from gNB/ng-eNB in step 1b in clause 6.6.2 corresponding to the active PDU session(s).

=== 5G AS security context for non-3GPP access ===
The key KN3IWF, the cryptographic keys, cryptographic algorithms and tunnel security association parameters used at IPsec layer for the protection of IPsec SA.

=== 5G AS Secondary Cell security context ===
The cryptographic keys at AS level for secondary cell with their identifiers, the identifier of the selected AS level cryptographic algorithms for secondary cell, the UP Security Policy at the network side, and counters used for replay protection.

=== Home Network Public Key Identifier ===
An identifier used to indicate which public/private key pair is used for SUPI protection and de-concealment of the SUCI.

=== subscription credential(s) ===
The set of values in the USIM and in the home operator's network, consisting of at least the long-term key(s) and the subscription identifier SUPI, used to uniquely identify a subscription and to mutually authenticate the UE and 5G core network.

=== subscription identifier de-concealing function ===
The Subscription Identifier De-concealing Function (SIDF) service offered by the network function UDM in the home network of the subscriber responsible for de-concealing the SUPI from the SUCI.

=== UE 5G security capability ===
The UE security capabilities for 5G AS and 5G NAS.

=== UE security capabilities ===
The set of identifiers corresponding to the ciphering and integrity algorithms implemented in the UE.

NOTE 9:	This includes capabilities for NG-RAN and 5G NAS, and includes capabilities for EPS, UTRAN and GERAN if these access types are supported by the UE.

== Security Domains § 4.1 ==

* '''Network access security (I)''': the set of security features that enable a UE to authenticate and access services via the network securely, including the 3GPP access and Non-3GPP access, and in particularly, to protect against attacks on the (radio) interfaces. In addition, it includes the security context delivery from SN to AN for the access security. 
* '''Network domain security (II)''': the set of security features that enable network nodes to securely exchange signalling data and user plane data. 
* '''User domain security (III)''': the set of security features that secure the user access to mobile equipment.
* '''Application domain security (IV)''': the set of security features that enable applications in the user domain and in the provider domain to exchange messages securely. Application domain security is out of scope of the present document.
* '''SBA domain security (V)''': the set of security features that enables network functions of the SBA architecture to securely communicate within the serving network domain and with other network domains . Such features include network function registration, discovery, and authorization security aspects, as well as the protection for the service-based interfaces. SBA domain security is a new security feature compared to TS 33.401.
* '''Visibility and configurability of security (VI)''': the set of features that enable the user to be informed whether a security feature is in operation or not.

== The 5G System architecture introduces the following security entities in the 5G Core network § 4.3 ==
* AUSF: 	AUthentication Server Function;
* ARPF: 	Authentication credential Repository and Processing Function;
* SIDF:		Subscription Identifier De-concealing Function;
* SEAF:		SEcurity Anchor Function.

== Requirements of UE § 5.2 ==

=== Subscriber privacy § 5.2.5 ===

The UE shall support 5G-GUTI.

The SUPI '''''should not''''' be transferred in clear text over NG-RAN except routing information, e.g. Mobile Country Code (MCC) and Mobile Network Code (MNC).

The Home Network Public Key shall be stored in the USIM. 

The protection scheme identifier shall be stored in the USIM.

The Home Network Public Key Identifier shall be stored in the USIM.

The SUCI calculation indication, either USIM or ME calculating the SUCI, shall be stored in USIM.

The ME shall support the null-scheme.If the home network has not provisioned the Home Network Public Key in USIM, the SUPI protection in initial registration procedure is not provided. In this case, the null-scheme shall be used by the ME.

Based on home operator's decision, indicated by the USIM, the calculation of the SUCI shall be performed either by the USIM or by the ME.

NOTE 1: 	If the SUCI calculation indication is not present, the calculation is in the ME.

In case of an unauthenticated emergency call, privacy protection for SUPI is not required.

Provisioning, and updating the Home Network Public Key, Home Network Public Key Identifier, protection scheme identifier, Routing Indicator, and SUCI calculation indication in the USIM shall be in the control of the home network operator. 

NOTE 2:	The provisioning and updating of the Home Network Public Key, Home Network Public Key Identifier, protection scheme identifier, and SUCI calculation indication is out of the scope of the present document. It can be implemented using, e.g. the Over the Air (OTA) mechanism. Routing Indicator can be updated, e.g., by OTA or as defined in clause 6.15. 

Subscriber privacy enablement shall be under the control of the home network of the subscriber. 

The UE shall only send the PEI in the NAS protocol after NAS security context is established, unless during emergency registration when no NAS security context can be established.

The Routing Indicator shall be stored in the USIM. If the Routing Indicator is not present in the USIM, the ME shall set it to a default value as defined in TS 23.003 [19].

== Requirements of AMF § 5.5 ==

=== Subscriber privacy § 5.5.3 ===
The AMF shall support to trigger primary authentication using the SUCI.
The AMF shall support assigning 5G-GUTI to the UE.
The AMF shall support reallocating 5G-GUTI to UE.
The AMF shall be able to confirm SUPI from UE and from home network. The AMF shall deny service to the UE if this confirmation fails.

== Requirements on SEAF § 5.6 ==

The security anchor function (SEAF) provides the authentication functionality via the AMF in the serving network.

The SEAF shall fulfil the following requirements:
* The SEAF shall support primary authentication using SUCI.

== Requirements of UDM § 5.8 ==

=== Subscriber privacy related requirements to UDM and SIDF § 5.8.2 ===
The SIDF is responsible for de-concealment of the SUCI and shall fulfil the following requirements:
* The SIDF shall be a service offered by UDM.
* The SIDF shall resolve the SUPI from the SUCI based on the protection scheme used to generate the SUCI. 

The Home Network Private Key used for subscriber privacy shall be protected from physical attacks in the UDM. 

The UDM shall hold the Home Network Public Key Identifier(s) for the private/public key pair(s) used for subscriber privacy.

The algorithm used for subscriber privacy shall be executed in the secure environment of the UDM.

=== Requirements on AUSF § 5.8a ===
The Authentication server function (AUSF) shall handle authentication requests for both, 3GPP access and non-3GPP access.

The AUSF shall provide SUPI to the VPLMN only after authentication confirmation if authentication request with SUCI was sent by VPLMN.

The AUSF shall inform the UDM that a successful or unsuccessful authentication of a subscriber has occurred.


<center>[[Telecommunications_info|To Telecommunications Info]]</center>